Buy Dissolved Oxygen Meter for Water From ACITEK

In recent years, with the continuous improvement of water quality management technology and level in water plants, online water quality monitoring system has been integrated as an emerging management method, triggering industry changes. With the help of advanced sensor technology and automation equipment, the system can monitor the quality of raw water, water production process and outgoing water in water plants 24 hours a day. From key indicators such as pH, turbidity to residual chlorine content, they can all be accurately measured, and data can be fed back in real time, which completely changes the lag and limitations of traditional manual sampling and monitoring. ​
After the online monitoring system is put into use, the water plant can capture subtle changes in water quality in a timely manner, quickly adjust the water production process, and ensure that the water quality is stable and meets the standards. This not only effectively improves the safety of water supply and ensures the health of residents' water use, but also greatly improves the operating efficiency of water plants and reduces labor costs and management difficulties. At present, the online water quality monitoring system has become an important measure for many water plants to optimize management. With the continuous iteration of technology, it is expected to be popularized in more water plants in the future, promoting the entire water supply industry to move towards intelligent and refined management, and building a solid line of defe

At a time when the world is paying more and more attention to environmental protection, the importance of water quality monitoring is self-evident. However, its development has encountered many bottlenecks. On the one hand, the uneven distribution of monitoring points and the insufficient number of monitoring points cannot fully and accurately reflect the water quality of the water area. Taking a large lake as an example, only a few monitoring points are set up sporadically around it, and the center of the lake and other areas have been in the monitoring blind spot for a long time. Once the water quality is abnormal, it is difficult to detect it in time. On the other hand, the aging of monitoring equipment and lagging technology have resulted in poor detection capabilities for trace pollutants and emerging pollutants. For example, some old sensors have extremely low detection sensitivity for some new pesticide residues, which cannot meet the increasingly stringent monitoring needs. At the same time, the massive monitoring data lacks unified standards and effective sharing mechanisms, forming "data islands" with low utilization rates. ​


<br>


In response to these thorny issues, industry experts and relevant departments have taken active actions. In order to optimize the layout of monitoring points, multiple departments such as water conservancy and environmental protection have jointly conducted research and scientifically planned additional monitoring points based on factors such as water functions and water flow directions. In terms of technological innovation, we will increase capital investment and encourage enterprises to develop new monitoring equipment, such as high-sensitivity sensors made of nanomaterials, which have greatly improved detection accuracy compared to traditional equipment. In terms of data management, we will start to build a national water quality monitoring data sharing platform to break down data barriers between departments and regions, promote data circulation, provide strong support for water quality management decisions, and help the water quality monitoring industry reach new heights.

Industrial waste water is discharged during the production process.it is an important cause of environmental pollution, especially water pollution. Therefore, industrial waste water must meet certain standards before discharged or enter the sewage treatment plant for treatment. Industrial waste water discharge standards are also classified by industries,such as paper industry,oily wastewater from Offshore Oil Development Industry, textile and dyeing waste water,food process,synthetic ammonia industrial waste water,steel industrial,electroplating waste water,calcium and polyvinyl Chloride industrial water,coal Industry,phosphorus industry water pollutant discharge,calcium and polyvinyl chloride process water,hospital medical wastewater,pesticide wastewater, metallurgical wastewater Industrial wastewater monitoring and testing parameters:PH, COD, BOD, petroleum, LAS, ammonia nitrogen, color, total arsenic, total chromium, hexavalent chromium, copper, nickel, cadmium, zinc, lead, mercury, total phosphorus , chloride, fluoride, etc. Domestic wastewater testing test: PH, color, turbidity, odor and taste, visible to the naked eye, total hardness, total iron, total manganese, sulfuric acid, chloride, fluoride, cyanide, nitrate, total number of bacteria, total large intestine Bacillus, free chlorine, total cadmium, hexavalent chromium, mercury, total lead, etc. Urban drainage waste water monitoring parameters: Water temperature (degrees), color, suspended solids, dissolved solids, animal and vegetable oils, petroleum, PH value, BOD5, CODCr, ammonia nitrogen N,) total nitrogen (in N), total phosphorus (in P), anionic surfactant (LAS), total cyanide, total residual chlorine (as Cl2), sulfide, fluoride, chloride , sulphate, total mercury, total cadmium, total chromium, hexavalent chromium, total arsenic, total lead, total nickel, total strontium, total silver, total selenium, total copper, total zinc, total manganese, total iron, volatile phenol, Trichloromethane, carbon tetrachloride, trichloroethylene, tetrachloroethylene, adsorbable organic halides (AOX, in terms of Cl), organophosphorus pesticides (in terms of P), pentachlorophenol.

Drinking water safety is clearly a critical priority.Yet the number of threats to water safety continues to grow daily, and include animal and human waste, improper disposal of chemicals, pesticides, and deep earth injection of hazardous materials. Contamination is also a threat due to improper water treatment and disinfection procedures, as well as from poorly maintained water distribution systems.

The Safe Drinking Water Act, has established national health-based standards that address both man-made and naturally occurring contamination. Compliance requires consistent, accurate measurement of water parameters performed in the lab, field, and online. While many measurements can be made in the lab, key variables such as pH, conductivity, fluoride, and chlorine can also be measured online in real-time to warn immediately if limits are exceeded.

Usually there is four steps for drinking water process
First step is Pre-treatment for source water
Second step is Filtration
Third step is disinfection process
Fourth step is distribution ,we have to measure pH,turbidity,hardness,residual chlorine,conductivity(TDS),then we can know the potential risks or threaten to public heath on time.the residual chlorine value should be over 0.3mg/L when be piped out from drinking water plant, and over 0.05mg/L at end of pipe network.turbidity must less 1NTU,pH value is between 6.5~8,5,pipe will be corrosive if pH value is less 6.5pH and easy scale if pH is over 8.5pH.

At present online water quality monitoring system can monitor water quality 24 hours and real time.it also provide quickly and correct information to decision-makers based on water quality changes in real time,Thereby providing people with healthy and safe water quality.

1. Product Application Overview
ACITEK G100-DO is a miniature DIN rail-mounted dissolved oxygen (DO) transmitter specially designed for industrial process water quality monitoring. With an ultra-narrow 12.5 mm modular housing, 4–20 mA active analog output, RS485 communication, 24 VDC power supply and integrated temperature measurement function, it perfectly solves the installation limitation of narrow control cabinets, compact fermenters and small-scale process monitoring stations. Matched with 12 mm diameter 316L stainless steel DO sensor (IP65 protection), it delivers fast response within 1 minute and stable long-term measurement, widely deployed in chemical, pharmaceutical, biotechnology, food & beverage, energy industries, industrial wastewater treatment and laboratory process analysis. The complete package includes DIN rail transmitter, stainless steel DO sensor, mounting fittings, signal cable, flow cell and operation manual, supporting OEM & ODM customized service for diversified on-site working conditionsacitekinst....

2. Industry-Specific Application Scenarios
2.1 Biotechnology & Pharmaceutical Fermentation
Biopharmaceutical and microbial fermentation processes require precise real-time dissolved oxygen control to guarantee strain reproduction, metabolite yield and drug purity.


Core application: Small & medium-sized bioreactors, seed culture tanks, cell culture lines.
Application advantages:

Ultra-thin 12.5 mm body allows centralized installation in dense PLC control cabinets with multi-channel parameter transmitters (pH, conductivity, DO) without cabinet space shortage.
Built-in manual calibration keys (K3/K4) support on-site one-point/two-point calibration without extra handheld calibrators; calibration cycle is recommended once every 3 months to sustain measurement accuracy.
Stainless steel 1.4435 sensor probe adapts to repeated SIP/CIP high-temperature sterilization sanitary working conditions, avoiding corrosion from culture medium and organic solvents.
4–20 mA signal connects to DCS/PLC to realize automatic linkage of stirring speed and aeration flow, stabilizing DO concentration in fermentation broth and improving production batch consistency.


Typical case: Antibiotic, amino acid, vaccine cell culture production lines.

2.2 Food & Beverage Production
Dissolved oxygen directly determines product flavor, shelf life and oxidation stability in food processing.


Core application: Beer/wine fermentation, pure water production, beverage filling pretreatment, dairy processing.
Working value:

Monitor low-level residual oxygen in finished water and beverage pipelines to suppress fat oxidation, color fading and flavor deterioration.
Fermentation tank online monitoring: control oxygen supply in yeast growth stage to avoid excessive DO causing off-flavor in finished wine.
Compact DIN rail design fits small beverage factory central control cabinets, realizing multi-point DO monitoring for multiple production lines with low overall investment cost.


Matching hardware: 12 mm stainless steel sanitary DO sensor with silicone sealing, compatible with food-grade fluid pipelines.

2.3 Chemical Industry Process Monitoring
Chemical synthesis, polymerization and fine chemical reactions are sensitive to dissolved oxygen to prevent invalid oxidation side reactions.


Application points: Chemical reaction kettles, solvent recovery systems, intermediate water circulation pipelines, fine chemical pilot test lines.
Product highlights for chemical sites:

4-wire system with 14–24 VDC wide voltage power supply, stable signal transmission under factory electromagnetic interference.
RS485 Modbus communication supports distributed networking, enabling centralized remote data collection of dozens of monitoring points.
Low-cost modular measurement station solution, ideal for small-batch pilot chemical workshops with limited cabinet space.



2.4 Energy & Power Industry Water Treatment
High dissolved oxygen in boiler feed water, cooling circulating water and thermal power sampling water will cause pipeline and equipment corrosion, shortening service life.


Core scenario: Thermal power plant condensate sampling rack, boiler deaerator outlet monitoring, cooling water circulation system.
On-site advantages:

Slim DIN rail transmitter can be densely arranged on sampling rack small-sized control boxes.
Synchronous measurement of dissolved oxygen and medium temperature, providing dual-parameter data for water chemical supervision.
4–20 mA analog signal uploads DO data to power plant monitoring system to trigger deaeration equipment linkage control.



2.5 Industrial Wastewater & Environmental Water Treatment
Aerobic and anaerobic biochemical tanks rely on precise DO adjustment to optimize activated sludge treatment efficiency and reduce aeration energy consumption.


Applications: Factory sewage treatment stations, small municipal wastewater aerobic tanks, discharge water quality monitoring wells.
Field performance:

IP65 stainless steel sensor probe resists sludge adhesion and weak corrosive wastewater medium.
Fast 1-minute response time timely reflects DO fluctuation in biochemical tanks to adjust fan operation frequency and cut power consumption.
Low maintenance cost, suitable for scattered small sewage treatment stations with limited operation manpower.



2.6 Laboratory & Pilot Test Equipment
Universities, R&D laboratories and pilot workshops have compact test equipment with limited installation space.


Usage scene: Laboratory bench bioreactors, small water quality test circulation devices, material oxidation test systems.
Laboratory advantages: Miniature transmitter saves laboratory control box space; simple manual calibration operation meets frequent experimental parameter calibration demands; one-year warranty and customizable OEM labels support laboratory self-developed test equipment matching.

3. Installation & System Application Modes
3.1 DIN Rail Central Cabinet Installation
The G100-DO transmitter adopts standard 35 mm DIN rail mounting, dozens of units can be side-by-side installed together with pH, conductivity transmitters inside narrow control cabinets, realizing multi-parameter centralized monitoring of the whole production line, which is the most mainstream application mode for medium and small factories.

3.2 Independent Small-Scale Monitoring Station
Matched with flow chamber, mounting bracket and cable, it forms a complete compact DO measuring station for single reactor, single pipeline or single wastewater tank independent monitoring, without large integrated analysis cabinet, greatly reducing equipment procurement and cabinet transformation cost.

3.3 PLC/DCS Automatic Control System Integration

Analog output: 4–20 mA active current signal accesses PLC analog module to realize closed-loop automatic control of aeration, stirring, deaeration equipment.
Digital communication: RS485 Modbus-RTU connects to industrial gateway, uploading DO & temperature data to upper computer, SCADA or cloud platform for remote real-time viewing and historical data recording.

4. Application Advantages Over Traditional Large DO Transmitters

Space-saving layout: Only 12.5 mm width, solving the installation bottleneck of narrow cabinets and compact equipment that large display transmitters cannot fit.
Cost-effective construction: Low unit price plus modular assembly reduces the total investment of multi-point monitoring stations, especially suitable for small factories and pilot projects.
Wide universal compatibility: One set of equipment covers biotech, food, chemical, energy and environmental protection industries; stainless steel sensor adapts to sanitary, corrosive and aqueous working conditions.
Easy on-site maintenance: Independent K3/K4 calibration buttons support field calibration without removing the transmitter from the cabinet; recommended quarterly calibration ensures long-term stable measurement.
Dual signal output: Simultaneous 4–20 mA analog and RS485 digital communication, compatible with both traditional PLC control and modern industrial internet remote monitoring systems.

5. Application Matching Notes

For sanitary fermentation and food production, select 1.4435 stainless steel sanitary DO sensor; for chemical wastewater, 316L stainless steel probe is recommended.
The transmitter body protection grade is IP20, so it must be installed inside closed control cabinets; the matched DO sensor reaches IP65 and can be directly inserted into pipelines or tanks.
Power supply range: 14–24 VDC 4-wire connection, avoid long-distance thin wire power supply to prevent voltage drop affecting measurement stability.
OEM/ODM customization is available for special industrial application requirements, including logo printing, cable length adjustment and flow chamber modification.