High Quality Water Ec Sensor

At a time when the world is paying more and more attention to environmental protection, the importance of water quality monitoring is self-evident. However, its development has encountered many bottlenecks. On the one hand, the uneven distribution of monitoring points and the insufficient number of monitoring points cannot fully and accurately reflect the water quality of the water area. Taking a large lake as an example, only a few monitoring points are set up sporadically around it, and the center of the lake and other areas have been in the monitoring blind spot for a long time. Once the water quality is abnormal, it is difficult to detect it in time. On the other hand, the aging of monitoring equipment and lagging technology have resulted in poor detection capabilities for trace pollutants and emerging pollutants. For example, some old sensors have extremely low detection sensitivity for some new pesticide residues, which cannot meet the increasingly stringent monitoring needs. At the same time, the massive monitoring data lacks unified standards and effective sharing mechanisms, forming "data islands" with low utilization rates. ​


<br>


In response to these thorny issues, industry experts and relevant departments have taken active actions. In order to optimize the layout of monitoring points, multiple departments such as water conservancy and environmental protection have jointly conducted research and scientifically planned additional monitoring points based on factors such as water functions and water flow directions. In terms of technological innovation, we will increase capital investment and encourage enterprises to develop new monitoring equipment, such as high-sensitivity sensors made of nanomaterials, which have greatly improved detection accuracy compared to traditional equipment. In terms of data management, we will start to build a national water quality monitoring data sharing platform to break down data barriers between departments and regions, promote data circulation, provide strong support for water quality management decisions, and help the water quality monitoring industry reach new heights.

1. Drinking Water Quality Online Monitoring


Drinking water safety supervision requires continuous tracking of dissolved ion content to judge raw water pollution, treatment efficiency and pipeline secondary contamination, which is the primary application scenario of CR-GS-10.


Application Points



Water plant full-process monitoring

Install CR-GS-10 at raw water intake, sedimentation tank outlet, filter section and finished water pipeline. Abrupt conductivity rise of raw water can warn agricultural chemical infiltration or industrial wastewater leakage; comparing conductivity before and after filtration evaluates the removal efficiency of mineral ions and impurities, ensuring finished water complies with national drinking water standards.
Community & commercial direct drinking water equipment

Mount the sensor on RO direct drinking machines in schools, hospitals, office buildings and shopping malls. Real-time conductivity data reflects filter element aging and membrane attenuation: once effluent conductivity surges, the system triggers maintenance reminder to avoid unqualified drinking water supply.



Matching Product Advantages



Platinum electrode features strong chemical inertness, resisting corrosion from residual chlorine in tap water and long-term stable measurement without frequent calibration;
Compact structure with Pg13.5, G1/2A and NPT multi-thread interfaces, easy to install on small-sized commercial water dispensers and pipeline flow cells;
Wide measuring range (0.05 μS/cm ~ 100 mS/cm) covers both low-conductivity purified water and medium-conductivity tap water.



2. Ion Exchange & Reverse Osmosis (RO) Pure Water Treatment Systems


Ion exchangers and reverse osmosis equipment are core processes for industrial pure water preparation, where conductivity is the key index to judge resin failure and RO membrane desalination performance, making CR-GS-10 an essential online monitoring component.


2.1 Ion Exchange Resin Regeneration Monitoring


Cation and anion exchange resins gradually lose ion exchange capacity during operation, accompanied by rising effluent conductivity. Install CR-GS-10 at the outlet of mixed bed/separate bed ion exchangers:



Set conductivity threshold linkage control; when readings exceed the standard value, the system automatically starts acid-alkali regeneration program;
Avoid manual periodic sampling detection, reduce labor cost and prevent unqualified pure water from flowing into downstream production lines.



2.2 Reverse Osmosis System Operation Control



Monitor primary and secondary RO product water conductivity to judge membrane integrity: conductivity jump indicates membrane rupture, seal failure or scaling blockage;
Install sensors on raw water inlet and concentrated water outlet to calculate water recovery rate, optimize dosing of scale inhibitors, reduce chemical consumption and extend membrane service life.



Matching Product Advantages



Stable operation under 6 bar process pressure, adapting to pipeline pressure of standard RO water treatment equipment;
Wide temperature adaptation (-5~+80°C) fits warm water circulation systems in industrial pure water workshops;
Low overall investment cost, suitable for mass deployment on medium and small-sized pure water equipment manufacturers.



3. Aquarium & Aquaculture Water Quality Management


Household aquariums, commercial ornamental fish breeding farms and hydroponic planting facilities all rely on conductivity to control water mineralization degree, and CR-GS-10 provides economical continuous detection solutions for civilian and small aquaculture scenes.


Application Points



Ornamental fish tank water adjustment

Different fish species have fixed adaptive mineral concentration ranges. CR-GS-10 continuously monitors water conductivity to guide regular water replacement and mineral additive dosing, avoiding fish stress or death caused by excessive or insufficient dissolved solids.
Small-scale aquaculture & hydroponics

Deploy the sensor in indoor hydroponic vegetable planting pools and mini aquatic breeding ponds. Conductivity fluctuation reflects nutrient solution concentration change, helping growers adjust fertilizer dosage in real time to stabilize plant growth environment.



Matching Product Advantages



Small and lightweight design, plug-type installation option without complex pipeline transformation;
One-year warranty reduces post-maintenance cost for aquarium merchants and individual users;
Platinum electrode resists biological adhesion of algae and aquatic microorganisms, maintaining stable measurement in long-term immersion.



4. General Laboratory & Multi-Scenario Routine Water Testing


Beyond industrial and civilian online monitoring, CR-GS-10 also serves as a universal conductivity probe for laboratory daily water analysis, matching small water quality analyzers for offline sampling measurement.


Application Points



Lab daily pure water machine effluent detection, verifying lab-grade purified water quality for chemical, environmental and biological experiments;
Routine sampling testing of surface water, groundwater and domestic sewage, recording conductivity changes as auxiliary pollution evaluation data;
Teaching laboratory demonstration experiments for water quality detection courses.



Matching Product Advantages



Dual-purpose design for online pipeline installation and offline immersion measurement;
K=10 cell constant compatible with mainstream conductivity transmitters and lab meters on the market, convenient equipment matching and replacement;
Robust glass electrode body with impact resistance, suitable for frequent mobile use in laboratories.



5. Universal Municipal & Light Industrial General Water Quality Inspection


CR-GS-10 can be extended to multiple light industrial and municipal auxiliary water monitoring scenarios:



Circulating cooling water monitoring for small factories: control conductivity to adjust blowdown frequency and reduce scaling and pipeline corrosion;
Swimming pool and spa water supervision: track total dissolved solids to assist disinfectant concentration management;
Landscape river and community fountain water quality regular monitoring, timely reflect external pollution input.



Core Product Strengths Supporting Multi-Scenario Application



Platinum electrode core material: Inert metal avoids oxidation and ion precipitation, long service life, minimal measurement drift after long-term underwater immersion;
Ultra-wide measuring range: 0.05 μS/cm to 100 mS/cm covers nearly all conventional clean water and lightly polluted water measurement demands;
Strong environmental adaptability: -5~+80°C temperature range and 6 bar pressure resistance adapt to most normal industrial and civilian water pipeline operating conditions;
Flexible installation compatibility: Three connection modes (Pg13.5 screw head, G1/2A & 1/2"-14 NPT thread, plug connector) match various pipeline sizes and equipment interfaces;
High cost performance: Compact integrated structure, low procurement cost, one-year full warranty, ideal for mass installation in medium and small water treatment projects.



Conclusion


As a versatile platinum two-electrode conductivity sensor, ACITEK CR-GS-10 covers full-chain application from municipal drinking water, industrial pure water preparation to civilian aquaculture and laboratory testing. Its balanced performance of measurement stability, environmental adaptability and cost advantage solves the demand of economical and reliable real-time conductivity monitoring for most conventional water quality scenes. For engineering integrators, water equipment manufacturers and laboratory users focusing on general water detection, CR-GS-10 is a preferred universal conductivity probe with wide compatibility and stable running performance.

This paper presents three representative field application cases to verify the actual performance, economic benefits and technical advantages of ACITEK LDO Model 1 in seawater aquaculture, municipal wastewater treatment plant and coastal river nutrient monitoring projects.


Case 1: Seawater Industrial Mariculture Base Real-Time DO Control


1.1 Project Background


A large-scale coastal marine ranch in Fujian operates recirculating seawater breeding tanks for grouper and abalone, covering 12,000 m² breeding area.



Original monitoring scheme: Traditional polarographic dissolved oxygen electrodes
Pain points encountered:


Seawater contains high Cl⁻, algae and barnacle attachment; electrode membrane fouled within 7–10 days, data drifted severely;
Weekly membrane replacement, monthly electrolyte refilling, daily manual cleaning; 2 full-time maintenance staff required for 32 breeding tanks;
H₂S produced by residual bait decomposition poisoned polarographic electrodes, leading to invalid readings and delayed oxygen supply adjustment;
Without stable real-time DO data, aerators ran at full load all day, resulting in huge electricity waste; low DO at night caused occasional fish hypoxia mortality (annual loss over 180,000 RMB).






1.2 Solution Deployment


The project replaced all old electrodes with ACITEK LDO Model 1 seawater version dissolved oxygen sensors:



Installation: 1 probe per recirculation tank, installed on pipeline thread interface (standard thread compatible with existing tank fixtures); 10m matched sensor cable connected to ACITEK G800 controller;
Configuration: Factory pre-calibration, plug-and-play without on-site calibration; built-in automatic temperature compensation, immune to seawater temperature fluctuation 12–32°C;
Linkage control: Set DO threshold 5.0–7.5 mg/L; when DO <5.0 mg/L, system auto-starts aerators; when DO >7.5 mg/L, aerators reduce frequency or shut down.



1.3 On-Site Operation Results



Ultra-low maintenance workload

No consumables (membrane/electrolyte) needed. Only quarterly simple surface wiping of sensor cap required. The maintenance team cut staffing from 2 to 1 part-time worker, saving labor cost around 65,000 RMB annually. The sensor cap maintains 12-month service life covered by official warranty.
Strong seawater anti-interference performance

Not affected by high-concentration chloride, sulfide, residual feed organic matter and marine biofouling. Continuous 12-month immersion test showed no measurement drift, data accuracy kept ±0.05 ppm below 5 ppm as original specification.
Energy saving & mortality reduction

Precise aeration frequency regulation cut aeration power consumption by 22%. Night hypoxia incidents were completely eliminated; fish survival rate increased from 82% to 97%, reducing aquaculture economic loss by over 160,000 RMB each year.
Customer Feedback

"The ACITEK LDO sensor solves our long-standing seawater measurement trouble. Stable readings without frequent replacement parts greatly lower our operating cost, and scientific oxygen control significantly improved breeding output." — Farm Technical Director



Case 2: Municipal Wastewater Plant Secondary Biochemical Treatment Tank Monitoring


2.1 Project Background


A medium-sized municipal sewage treatment plant in Jiangsu adopts AAO secondary treatment process, daily treatment capacity 40,000 tons. Dissolved oxygen in aerobic tank is the core parameter to balance nitrification efficiency and aeration energy consumption.



Previous problem: Polarographic DO probes easily blocked by activated sludge foam; data fluctuated widely, unable to support automatic variable-frequency blower control; operators relied on manual sampling calibration twice per week, aerators operated with excessive air supply, high power consumption.



2.2 Project Scheme



Deploy 8 sets of ACITEK LDO Model 1 probes evenly distributed in aerobic biochemical tank;
Probe specification: 155mm length, 28.25mm diameter, Noryl corrosion-resistant body, maximum 3.5 bar pressure resistance adapting to tank immersion depth;
Data transmission: Max 100m transmission distance to G800 control unit, realizing real-time DO curve display and blower linkage regulation.









" />


Sensor Installed in Aeration Tank









2.3 Application Benefits



Stable measurement without flow demand

ACITEK LDO technology does not consume oxygen during detection, requiring no minimum water flow. Even in static sludge deposition zones, T90 response time <40s, quickly capturing DO concentration changes.
Cut down maintenance frequency drastically

Factory pre-calibration eliminates monthly air calibration work; no anode/cathode cleaning, membrane and electrolyte replacement. Calibration cycle extended to 6 months, annual maintenance time reduced by 70%.
Aeration energy consumption reduction

Stable continuous DO signal supports intelligent blower variable frequency control, maintaining aerobic tank DO steady at 2–3 mg/L. Annual power saving for aeration system reaches about 130,000 kWh, equivalent to 100,000 RMB electricity cost reduction.
Effluent standard compliance improvement

Stable dissolved oxygen environment promotes microbial nitrification, effluent ammonia nitrogen concentration stably below national discharge standard, compliance rate raised from 92% to 99.8%.



Case 3: Coastal Estuary Water Nutrient & Discharge Compliance Monitoring


3.1 Project Profile


Local ecological environmental bureau launched coastal river real-time water quality monitoring stations to track nutrient salt and DO variation, supervise industrial wastewater outlet discharge up to standard. Water body is brackish mixing fresh water and seawater, with complex interference substances including heavy metal ions, residual chlorine (<4 ppm), sulfate and surfactant.


3.2 Equipment Selection Reason


Traditional electrochemical DO sensors suffer severe cross-interference from H₂S, metal ions and chloride in brackish water, causing measurement distortion. ACITEK LDO Model 1 has exclusive anti-interference performance, unaffected by H₂S, K⁺, Na⁺, heavy metal ions, Cl⁻ and low-concentration residual chlorine, fully matching estuary water monitoring demands.


3.3 Field Operation Effect



Long-term continuous immersion for 10 months without data distortion, accurately recording daily DO fluctuation for nutrient eutrophication analysis;
Support remote unattended monitoring, sensor cable up to 10m, immersion depth up to 34m to cover multi-layer water body sampling;
One-point air calibration simple operation for routine inspection, convenient for environmental law enforcement personnel on-site verification;
Data provides reliable basis for early warning of algal bloom and pollution source tracing, assisting environmental management department to complete regular water quality assessment reports.



Core Advantages Verified by All Three Field Cases


Combining seawater breeding, municipal sewage and coastal environmental monitoring practical application data, ACITEK LDO Model 1 shows irreplaceable strengths compared with conventional DO electrodes:



Zero pre-use calibration & no drift

3D factory calibration before delivery, out-of-box usable; no signal drift under long-term continuous operation, ensuring long-period data authenticity.
Ultra-low operation & maintenance cost

No consumables (membrane, electrolyte), only annual replacement of sensor cap; labor and material maintenance expenditure reduced by over 60% versus polarographic sensors.
Powerful anti-interference for complex water bodies

Optical luminescent principle avoids electrode poisoning; suitable for seawater, sludge wastewater, brackish estuary water with various ion contaminants.
Wide environmental adaptability

0–50°C operating temperature, 3.5 bar pressure resistance, compact small footprint for flexible pipeline/tank installation; compatible with ACITEK G800 controller for automatic linkage control.
Cost-effective seawater dedicated version

Stainless steel sensing head with corrosion resistance against saline water, one-year full machine warranty, support OEM/ODM customized cable length and thread interfaces for engineering integrators.



Conclusion


ACITEK LDO Model 1 (AC9020000-SW) luminescent dissolved oxygen sensor has achieved remarkable energy-saving, labor-saving and efficiency-improving results in marine aquaculture, municipal wastewater secondary treatment and coastal water environmental monitoring projects. Its low-maintenance, high-stability and strong anti-interference characteristics perfectly solve the long-standing pain points of traditional dissolved oxygen electrodes in complex water quality scenarios, especially seawater working conditions. For water treatment system integrators, aquaculture enterprises and environmental monitoring institutions pursuing long-term reliable online DO detection, ACITEK LDO Model 1 is a preferred cost-performance optical dissolved oxygen monitoring solution.