Buy Electrical Conductivity Sensor for Water From ACITEK

In today's society, water is a basic substance for human life and economic development, and its importance is self-evident. From daily drinking to industrial production and agricultural irrigation, the quality of water is directly related to people's health and sustainable development of the industry. The water quality monitoring industry has also shouldered a heavy responsibility and become a key line of defense to protect the safety of water resources. ​
However, the rapid development of modern social economy is bringing many difficult problems to water quality monitoring. On the one hand, emerging pollutants continue to emerge, such as microplastics and drug residues, and traditional monitoring technology is difficult to capture their traces, and it is urgent to develop new detection methods. On the other hand, with the expansion of cities and changes in industrial layout, the scientific nature of the layout of water quality monitoring points has been challenged, and some areas have insufficient monitoring coverage, which cannot timely and comprehensively reflect the dynamics of water quality. ​
Faced with these challenges, the industry actively explores innovative paths. In the field of technological innovation, scientific research teams have increased investment to develop monitoring equipment based on cutting-edge technologies such as nanotechnology and biosensors, greatly improving the detection accuracy and efficiency of trace pollutants. At the same time, with the help of Internet of Things technology, an intelligent monitoring network is built to realize real-time transmission and analysis of monitoring data, effectively make up for the shortcomings of insufficient monitoring points, improve the overall monitoring efficiency, provide solid support for the scientific management of water resources, and ensure that high-quality water sources continue to benefit society.

Drinking water safety is clearly a critical priority.Yet the number of threats to water safety continues to grow daily, and include animal and human waste, improper disposal of chemicals, pesticides, and deep earth injection of hazardous materials. Contamination is also a threat due to improper water treatment and disinfection procedures, as well as from poorly maintained water distribution systems.

The Safe Drinking Water Act, has established national health-based standards that address both man-made and naturally occurring contamination. Compliance requires consistent, accurate measurement of water parameters performed in the lab, field, and online. While many measurements can be made in the lab, key variables such as pH, conductivity, fluoride, and chlorine can also be measured online in real-time to warn immediately if limits are exceeded.

Usually there is four steps for drinking water process
First step is Pre-treatment for source water
Second step is Filtration
Third step is disinfection process
Fourth step is distribution ,we have to measure pH,turbidity,hardness,residual chlorine,conductivity(TDS),then we can know the potential risks or threaten to public heath on time.the residual chlorine value should be over 0.3mg/L when be piped out from drinking water plant, and over 0.05mg/L at end of pipe network.turbidity must less 1NTU,pH value is between 6.5~8,5,pipe will be corrosive if pH value is less 6.5pH and easy scale if pH is over 8.5pH.

At present online water quality monitoring system can monitor water quality 24 hours and real time.it also provide quickly and correct information to decision-makers based on water quality changes in real time,Thereby providing people with healthy and safe water quality.

1. Product Overview
Manufactured in Shanghai, China, the ACITEK G400-COND is a fixed-installation 4-wire conductivity transmitter tailored for industrial production and laboratory precision monitoring. Featuring a glass bead reinforced PBT enclosure and PP structural materials, the device delivers ultra-wide-range conductivity measurement (0.000 μS/cm – 200.0 mS/cm). It supports all mainstream 2-electrode and 4-electrode sensors, with freely selectable cell constants from 0.005 to 20 cm⁻¹, and compatible with Pt1000 and NTC 30 kΩ temperature detectors.
Equipped with a high-contrast LCD display, dual current outputs, two floating relay contacts, and dual 24VDC/230VAC power supply options, the transmitter integrates real-time sensor monitoring and preventive maintenance prompts. It supports wall, pipe and panel mounting, features intuitive operation and on-site medium calibration, and offers OEM/ODM customization with a standard one-year warranty.
2. Core Product Advantages
The G400-COND solves key pain points of traditional conductivity monitoring with outstanding comprehensive performance. Its full-range measurement adapts to various liquid environments without equipment replacement. Dual independent outputs realize synchronous detection and signal transmission of conductivity and temperature, supporting precise system control. The built-in relay alarm function enables automatic on-site equipment linkage without additional modules.
With corrosion-resistant and durable industrial-grade housing, it adapts to harsh production environments. Meanwhile, portable calibration, factory reset function and intelligent maintenance reminders greatly reduce daily operation and maintenance costs, ensuring long-term stable and accurate measurement data.
3. Main Application Scenarios
3.1 High-Purity Water Monitoring (Pharmaceutical, Electronics, Power Industry)
Widely used in pharmaceutical water for injection, semiconductor cleaning water and power plant boiler feedwater monitoring. Matched with low cell constant electrodes, it realizes real-time monitoring of water ion purity and automatic temperature compensation. It triggers alarms and linkage protection when water conductivity exceeds the standard, effectively avoiding product contamination and equipment scaling, and meeting GMP and industrial safety supervision standards.
3.2 Industrial Circulating Water & Cooling Tower Control
Applied to factory cooling circulating water systems, it monitors conductivity changes caused by water evaporation and salt accumulation in real time. By setting threshold parameters, it automatically controls pipeline blowdown and scale inhibitor dosing, optimizes water circulation concentration ratio, reduces fresh water consumption and chemical costs, and prevents pipeline corrosion and blockage.
3.3 Chemical & Electroplating Process Concentration Control
Adaptable to acid-base mixing solutions and electroplating bath liquid monitoring. By configuring different cell constants for solutions of varying concentrations, it realizes closed-loop automatic control of solution concentration through relay-linked dosing pumps. It also monitors the salinity of factory wastewater discharge to ensure compliance with environmental protection discharge standards and stabilize product yield.
3.4 Sewage & Reclaimed Water Treatment
Installed in sewage treatment tanks and discharge pipelines, it uses conductivity data to reflect water TDS content, quickly identify sudden impact of high-salinity wastewater, and monitor the treatment effect of reclaimed water. Real-time data upload meets environmental supervision recording requirements and helps optimize biochemical treatment processes.
3.5 Food & Beverage CIP Cleaning Monitoring
Used for pipeline CIP acid-base cleaning process monitoring in food and beverage factories. It judges detergent concentration and fresh water rinsing endpoint through conductivity values, avoids residual cleaning agents affecting food safety, realizes automated cleaning control, and saves water and detergent resources.
3.6 Laboratory Analytical Testing
Suitable for long-term fixed monitoring of laboratory sample solutions. It supports flexible parameter calibration and cell constant adjustment, with a clear high-contrast display. The integrated temperature detection function realizes comprehensive analysis of solution properties, simplifying laboratory daily detection and instrument maintenance work.
4. On-Site Application Compatibility
The G400-COND boasts strong on-site adaptability. Three installation methods adapt to equipment rooms, outdoor stations and laboratory cabinets. The universal power supply design matches mainstream industrial power systems, and standard 4–20mA analog signals are seamlessly compatible with PLC, DCS and monitoring hosts. It supports most mainstream sensors on the market, reducing equipment upgrade costs. Customized services can meet the personalized needs of system integrators and manufacturers.
5. Conclusion
The ACITEK G400-COND conductivity transmitter is a multi-scenario, high-stability monitoring instrument integrating detection, alarm and signal transmission. With full-range measurement, intelligent control, simple operation and strong environmental adaptability, it covers mainstream monitoring scenarios such as industrial water treatment, chemical production, food processing and laboratory testing. With reliable quality and perfect after-sales guarantee, it provides efficient, low-cost and automated conductivity monitoring solutions for various industries.

Updated Environmental Regulations Bring New Compliance Requirements for Wastewater Online Monitoring Equipment


With the official implementation of China’s HJ 212-2025 Technical Requirements for Data Transmission of Pollutant Automatic Monitoring System and the upcoming enforcement of the Ecological Environment Code, stricter supervision is being carried out on wastewater discharge monitoring. Regulators have raised higher standards for online water quality instruments used at wastewater outlets, including pH, dissolved oxygen and conductivity sensors. Factories in chemical, pharmaceutical, food & beverage industries, together with industrial wastewater treatment plants, are now entering a critical period to evaluate and upgrade their monitoring systems.

Core Updates in New Environmental Standards

Full data traceability to prevent distorted monitoring results Unique device identification codes are required for all field monitoring instruments during network access. Raw measurement data, calibration logs and equipment operation records must be stored for long-term review. Any modification to instrument parameters will be recorded automatically. Unauthorized devices cannot connect to official environmental monitoring platforms.
Higher standards for long-term measurement stability Wastewater usually contains sludge, weak acid, alkali and dissolved salts. Regulators demand sensors with reliable temperature compensation and low measurement drift. Sensors prone to corrosion, scaling and frequent deviation will be regarded as invalid monitoring equipment during official inspections.
Unified communication protocol for seamless data networking New standards standardize data interaction between sensors, transmitters and data collectors. Instruments shall support standard Modbus-RTU and stable 4–20mA analog signals. Outdated equipment with unstable signal output or incompatible communication cannot meet current compliance demands.

ACITEK Solutions for Regulatory Compliance
ACITEK offers a complete portfolio of water quality sensors and transmitters fully adapted to the latest environmental monitoring requirements: • AC580 series conductivity sensors, industrial pH electrodes and DO sensors feature built-in PT1000 temperature compensation. Wetted SS316L material provides anti-corrosion performance in complicated wastewater media. • G100 compact DIN rail transmitters support 4–20mA active output + RS485 Modbus dual signals. All parameter changes are logged automatically to meet traceability requirements. • Complete accessories including flow cells, immersion holders and mounting fittings comply with HJ installation & operation specifications.

Recommendations for End Users & System Integrators

For existing monitoring stations: Test sensor accuracy and signal stability in advance. Replace aging instruments in phases to avoid compliance risks.
For new wastewater treatment projects: Adopt integrated monitoring systems with both analog and digital communication to satisfy long-term regulatory demands.
Form standardized maintenance schedules, regularly clean and calibrate sensors and archive all calibration documents.

ACITEK provides professional technical support and customized online monitoring packages for wastewater discharge applications. If you need a complete solution for pH, DO and conductivity monitoring in wastewater projects, please contact our engineering team.

ACITEK Team Explores WATERTECH CHINA 2026 for Industry Exchange


June 12, 2026

From June 9 to 11, WATERTECH CHINA 2026 (part of WieTec) was successfully held at National Exhibition and Convention Center (Hongqiao), Shanghai. As one of Asia’s top water treatment exhibitions, the event gathers thousands of global suppliers covering water quality monitoring, industrial wastewater treatment, smart water management and environmental restoration.


ACITEK’s technical and marketing team visited the exhibition to learn cutting-edge industry developments and conduct in-depth exchanges with peer manufacturers. The team focused on the latest technical solutions of dissolved oxygen sensors, conductivity probes and online analytical transmitters.


During communications with industry counterparts, we discussed hot topics including optical LDO technology optimization for seawater & wastewater applications, design improvements for low-maintenance water sensors, market demands from domestic projects and overseas markets, as well as challenges under complex working conditions. We shared practical field experience of our LDO Model 1 seawater dissolved oxygen sensor (AC9020000-SW) and CR-GS-10 two-electrode conductivity sensor.


This exhibition delivers valuable insights into market competition and technical trends. Moving forward, ACITEK will keep optimizing water quality sensing products for municipal wastewater, mariculture, pure water systems and coastal water monitoring. We look forward to further communication and cooperation with all partners in the environmental protection industry.