High Quality Water Conductivity Tester From ACITEK

In today's society, water is a basic substance for human life and economic development, and its importance is self-evident. From daily drinking to industrial production and agricultural irrigation, the quality of water is directly related to people's health and sustainable development of the industry. The water quality monitoring industry has also shouldered a heavy responsibility and become a key line of defense to protect the safety of water resources. ​
However, the rapid development of modern social economy is bringing many difficult problems to water quality monitoring. On the one hand, emerging pollutants continue to emerge, such as microplastics and drug residues, and traditional monitoring technology is difficult to capture their traces, and it is urgent to develop new detection methods. On the other hand, with the expansion of cities and changes in industrial layout, the scientific nature of the layout of water quality monitoring points has been challenged, and some areas have insufficient monitoring coverage, which cannot timely and comprehensively reflect the dynamics of water quality. ​
Faced with these challenges, the industry actively explores innovative paths. In the field of technological innovation, scientific research teams have increased investment to develop monitoring equipment based on cutting-edge technologies such as nanotechnology and biosensors, greatly improving the detection accuracy and efficiency of trace pollutants. At the same time, with the help of Internet of Things technology, an intelligent monitoring network is built to realize real-time transmission and analysis of monitoring data, effectively make up for the shortcomings of insufficient monitoring points, improve the overall monitoring efficiency, provide solid support for the scientific management of water resources, and ensure that high-quality water sources continue to benefit society.

Industrial waste water is discharged during the production process.it is an important cause of environmental pollution, especially water pollution. Therefore, industrial waste water must meet certain standards before discharged or enter the sewage treatment plant for treatment. Industrial waste water discharge standards are also classified by industries,such as paper industry,oily wastewater from Offshore Oil Development Industry, textile and dyeing waste water,food process,synthetic ammonia industrial waste water,steel industrial,electroplating waste water,calcium and polyvinyl Chloride industrial water,coal Industry,phosphorus industry water pollutant discharge,calcium and polyvinyl chloride process water,hospital medical wastewater,pesticide wastewater, metallurgical wastewater Industrial wastewater monitoring and testing parameters:PH, COD, BOD, petroleum, LAS, ammonia nitrogen, color, total arsenic, total chromium, hexavalent chromium, copper, nickel, cadmium, zinc, lead, mercury, total phosphorus , chloride, fluoride, etc. Domestic wastewater testing test: PH, color, turbidity, odor and taste, visible to the naked eye, total hardness, total iron, total manganese, sulfuric acid, chloride, fluoride, cyanide, nitrate, total number of bacteria, total large intestine Bacillus, free chlorine, total cadmium, hexavalent chromium, mercury, total lead, etc. Urban drainage waste water monitoring parameters: Water temperature (degrees), color, suspended solids, dissolved solids, animal and vegetable oils, petroleum, PH value, BOD5, CODCr, ammonia nitrogen N,) total nitrogen (in N), total phosphorus (in P), anionic surfactant (LAS), total cyanide, total residual chlorine (as Cl2), sulfide, fluoride, chloride , sulphate, total mercury, total cadmium, total chromium, hexavalent chromium, total arsenic, total lead, total nickel, total strontium, total silver, total selenium, total copper, total zinc, total manganese, total iron, volatile phenol, Trichloromethane, carbon tetrachloride, trichloroethylene, tetrachloroethylene, adsorbable organic halides (AOX, in terms of Cl), organophosphorus pesticides (in terms of P), pentachlorophenol.

Drinking water safety is clearly a critical priority.Yet the number of threats to water safety continues to grow daily, and include animal and human waste, improper disposal of chemicals, pesticides, and deep earth injection of hazardous materials. Contamination is also a threat due to improper water treatment and disinfection procedures, as well as from poorly maintained water distribution systems.

The Safe Drinking Water Act, has established national health-based standards that address both man-made and naturally occurring contamination. Compliance requires consistent, accurate measurement of water parameters performed in the lab, field, and online. While many measurements can be made in the lab, key variables such as pH, conductivity, fluoride, and chlorine can also be measured online in real-time to warn immediately if limits are exceeded.

Usually there is four steps for drinking water process
First step is Pre-treatment for source water
Second step is Filtration
Third step is disinfection process
Fourth step is distribution ,we have to measure pH,turbidity,hardness,residual chlorine,conductivity(TDS),then we can know the potential risks or threaten to public heath on time.the residual chlorine value should be over 0.3mg/L when be piped out from drinking water plant, and over 0.05mg/L at end of pipe network.turbidity must less 1NTU,pH value is between 6.5~8,5,pipe will be corrosive if pH value is less 6.5pH and easy scale if pH is over 8.5pH.

At present online water quality monitoring system can monitor water quality 24 hours and real time.it also provide quickly and correct information to decision-makers based on water quality changes in real time,Thereby providing people with healthy and safe water quality.

Case 1: Thermal Power Plant Boiler Feed Water & Condensate Monitoring
Project Background
A 2×300MW thermal power plant in East China needs full-process monitoring of deaerator outlet feed water, condenser condensate and boiler drain water. Per national power industry standard DL/T 502.29-2019, tiny ion impurities in water will cause boiler scaling and turbine blade corrosion, which may trigger unplanned shutdown and huge economic loss. The original old conductivity sensors had two pain points:


Ordinary 304 stainless steel electrodes corroded rapidly under chloride-containing condensate, measurement drift occurred within 3 months;
Non-standard thread fittings required customized welding bases, high installation cost and difficult later disassembly maintenance.

ACITEK Solution Deployment

Sensor selection: AC58031404 SS316L 2-electrode conductivity sensor (K=1cm⁻¹), 3/4NPT male thread directly matched with pipeline standard 3/4NPT tee joint, no extra custom fittings;
Installation layout: Installed on condensate sampling pipeline, boiler feed water outlet and blowdown pipeline via side pipeline insertion; 44mm insertion length ensures electrode fully immersed in stable fluid, avoiding bubble interference;
System matching: Paired with ACITEK G100 compact DIN rail transmitter, 4-20mA active signal access plant DCS system, RS485 Modbus upload data to SCADA platform; built-in PT1000 automatic temperature compensation eliminates temperature drift error of high-temperature water samples;
Working condition adaptation: SS316L material resists trace chloride ion corrosion in condensate, withstands 17bar working pressure and 90℃ sampling water temperature.

On-site Operation Effect

Measurement stability: After 12 months continuous operation, measurement deviation is always within ±1% (0.02~5000µS/cm) and ±3% (>5000µS/cm), no regular calibration drift phenomenon;
Maintenance cost reduction: Replace cycle extended from 3 months to 12 months, only quarterly simple surface cleaning is needed, saving 70% of annual sensor replacement labor & material cost;
Safety optimization: Real-time conductivity abnormal linkage alarm timely reminds resin regeneration and condenser leakage risk, boiler scaling failure rate decreased by 8%, annual power generation loss risk reduced greatly.

Case 2: Semiconductor Factory Ultrapure Water (UPW) Preparation Line Monitoring
Project Background
A wafer manufacturing enterprise in Shanghai built a 18.25MΩ·cm ultrapure water production line, requiring real-time monitoring of RO reverse osmosis effluent, EDI terminal ultrapure water and cleaning circulating water. The core demand is to capture tiny conductivity rise caused by membrane element damage or ion exchange resin failure, to avoid wafer etching pollution and mass product scrap.

Application Scheme & Configuration

Sensor matching logic: K=1cm⁻¹ wide-range electrode fits full-process water quality monitoring—low-conductivity ultrapure water (0.05~2µS/cm) and medium-conductivity intermediate circulating water (500~5000µS/cm) can be measured by one sensor model, reducing spare parts types;
Installation method: Adopt flow cell pipeline installation, 3/4NPT thread quickly connect small-bore flow cell, compact structure fits narrow space of ultrapure water equipment rack;
Signal transmission: 5m shielded cable anti-electromagnetic interference in clean workshop, matched G100-DIN rail transmitter centralized installed in small control cabinet, multi-point conductivity data unified upload to water treatment PLC;
Customization support: Factory customized 10m long cable for remote sampling points according to workshop layout, realizing unified sensor model for all monitoring positions.

Actual Benefit

Early warning capability: Quickly capture conductivity fluctuation of 0.1µS/cm, advance 3~5 days to judge EDI resin failure, avoid batch wafer contamination loss;
Cost optimization: Single sensor covers all water quality sections, no need to prepare multiple electrode constants for different process sections, spare parts inventory cost cut by 45%;
Stable long-term operation: SS316L electrode will not release metal ions into ultrapure water, meet semiconductor high-purity water monitoring requirements, one-year warranty provides stable after-sales guarantee.

Case 3: Fine Chemical Plant Reaction Kettle & Circulation Cooling Water Monitoring
Project Overview
A fine chemical factory producing pharmaceutical intermediates has multiple reaction kettles and cooling water circulation systems. It needs to monitor electrolyte concentration in synthesis liquid and circulating water conductivity to control reaction conversion rate and prevent pipeline scaling blockage. The medium contains weak organic acid and trace chloride, putting forward high corrosion resistance requirements for electrodes.

ACITEK Deployment Plan

Tank & dual pipeline installation: Reaction kettle side wall 3/4NPT thread interface for sensor insertion; cooling water main pipeline symmetrical installation two sensors to monitor inlet & outlet conductivity;
Material advantage: SS316L electrode effectively resist weak acid and chloride corrosion, compared with plastic-shell electrodes, it is not easy to deform and aging under 80℃ circulating water long-term soaking;
Control linkage: 4-20mA signal feeds back to reaction PLC, automatically adjust raw material feeding amount according to solution conductivity; cooling water conductivity high value triggers automatic dosing & blowdown control to reduce scaling;
Maintenance convenience: Standard 3/4NPT thread can be directly screwed out without stopping production for short-term replacement cleaning, greatly improving production continuity.

Site Feedback

Reaction yield improved: Stable real-time conductivity data optimizes feeding control, intermediate product yield increased by 12%;
Pipeline maintenance cycle extended: Timely cooling water blowdown control reduces scaling frequency, pipeline cleaning cycle from 1 month extended to 4 months;
Wide range adaptability: One sensor continuously measures synthesis liquid (1000~20000µS/cm) and cooling water (50~800µS/cm), equipment procurement cost reduced.

Case 4: Small Factory Sewage Treatment Station Discharge Water Monitoring
Demand Background
Multiple small chemical & food processing factories built decentralized sewage treatment stations, needing online conductivity monitoring of aerobic tank effluent and final discharge water to meet environmental protection real-time upload requirements. The on-site cabinet space is narrow, with limited maintenance manpower, requiring low-cost, easy-to-install & low-maintenance conductivity measurement solution.

Matching Solution

Low-cost integrated system: AC58031404 conductivity sensor + G100 ultra-narrow DIN rail transmitter (12.5mm width), multiple sets side-by-side installed in small control box without cabinet reconstruction;
Immersion installation: 3/4NPT thread matched with stainless steel mounting sleeve, directly put into sewage outlet weir tank, 44mm insertion length avoids sludge sediment coverage at tank bottom;
Signal output dual mode: 4-20mA analog signal access environmental protection data collector, RS485 remote data upload to factory cloud platform, realize unattended monitoring;
Adapt to wastewater medium: SS316L anti-corrosion electrode resists sewage weak acid & alkali medium, not easy to be corroded by organic sewage.

Operation Results

Meet environmental compliance requirements: Continuous 24h online conductivity data meets local environmental bureau monitoring upload standards, no penalty risk due to missing monitoring data;
Labor saving: Only quarterly simple cleaning of electrode surface sludge, no frequent calibration, suitable for unattended small sewage stations;
Space saving advantage: Ultra-thin transmitter + compact sensor solves the problem of small control box insufficient installation space, overall equipment investment reduced by 30% compared with split large display conductivity meters.

Core Product Advantages Reflected in All Cases

Universal 3/4NPT standard thread: Compatible with all industrial pipeline, tank, flow cell common interfaces, no customized fittings, low installation cost and fast construction;
SS316L all wetted material: Excellent corrosion resistance to chloride, weak acid, weak alkali medium, long service life in power, chemical, semiconductor, wastewater industries;
K=1cm⁻¹ ultra-wide measurement range (0.02~50000µS/cm): Cover ultrapure water, intermediate process water, high-salinity sewage, one model for multi-scene use, reduce spare parts inventory;
Built-in PT1000 temperature sensor: Automatic temperature compensation, eliminate measurement error caused by medium temperature change, stable data under high/low temperature working conditions;
Flexible cable customization: Standard 5m cable, support OEM/ODM customized length to adapt long-distance sampling points;
Perfect matching ACITEK G100 DIN rail transmitters: Form compact low-cost online conductivity monitoring system, 4-20mA + RS485 dual signal output, compatible with all mainstream PLC/DCS industrial control systems;
Pressure & temperature resistance: Max 17bar (250psig) pressure, 93℃ medium temperature, adapt high-temperature & high-pressure industrial water sampling pipelines.

Summary
ACITEK AC58031404 SS316L 2-electrode conductivity sensor breaks the limitation of single-scene electrodes. With standard 3/4NPT thread, wide measurement range and reliable corrosion-resistant material, it has formed mature, low-cost and stable monitoring schemes in power, semiconductor, fine chemical and wastewater treatment industries. Whether it is high-standard ultrapure water precision monitoring, high-temperature high-pressure power plant water sampling, corrosive chemical process liquid control or decentralized sewage environmental monitoring, this sensor can meet on-site measurement demands, and combined with ACITEK G100 series compact transmitters, it provides users with space-saving, easy-maintenance and customizable industrial water conductivity full-set measurement solutions.