Product details of the dissolved ozone sensor
Product Introduction
ACITEK dissolved ozone sensor is well developed using modern machinery and production technology. The product has an impeccable quality with stable performance and long service life. Every production stage is highly valued to achieve high quality of dissolved ozone sensor.
Product Introduction
Accurate process monitoring of dissolved oxygen in water for precise aeration control；
ACITEK's next generation DO Probe, the LDO Model 1 (Luminescent Dissolved Oxygen), accurately measures dissolved oxygen levels in water by utilizing luminescent dissolved oxygen technology within the O®2 sensor (oxygen sensor) cap ensuring high levels of accuracy. The ACITEK LDO probe requires no calibration and can be used right out of the box. Using this DO probe to monitor dissolved oxygen levels in your water applications saves time and money through minimum maintenance (no electrolyte solution) and overall reduction in aeration blower energy usage.An improved body design optimizes the probe’s temperature sensor to provide an even faster response time to process variability as well. The probe comes with a one year warranty, and the sensor cap has a one year warranty.Applications:
· Discharge；
· Nutrient Monitoring；
· Sea Water；
· Secondary Treatment；
Applications and Benefits
· No Calibration Required：The ACITEK LDO probe uses luminescent dissolved oxygen technology. Traditional DO probes require DO sensor calibration, which increase maintenance requirements.
· No Membranes to Replace：There is virtually no maintenance with ACITEK's breakthrough luminescent technology, as there are no membranes to replace, no electrolyte solution to replenish, and no anode or cathode to clean.
· No Drift: Cutting-edge 3D calibration procedure is conducted prior to shipping, the DO probe will not drift and is more accurate than ever before.
· No Complications: Our newest DO probe has a robust design with a smaller footprint allows for easier handling with enhanced durability.
Product parameters
| Accuracy | ± 0.05 ppm Below 5 ppm |
| Accuracy 2 | ± 0.1 ppm Above 5 ppm |
| Accuracy 3 | Temperature: ± 0.2 °C |
| Body material | Noryl |
| Cable Length | 10 m (33 ft) |
| Calibration Method | All Probes are factory calibrated and ready to useAir Calibration: one point, 100% water saturated airSample Calibration: comparison to standard instrument,or comparison to Winkler Titration method |
| Controller Compatibility | G800 |
| Diameter | 28.25 mm |
| Dimensions (D x L) | 28.25 mm x 155 mm |
| Flow Rate | None required |
| Interferences | No Interferences from the following: H2S, pH, K+, Na+, Mg2+, Ca2+,NH4+, Al3+, Pb2+, Cd2+, Zn2+, Cr (total), Fe2+, Fe3+, Mn2+, Cu2+, Ni2+,Co2+, CN-, NO3-, SO42-, S2-, PO43-, Cl-, anion active surfactants,crude oils, Cl2 < 4 ppm; |
| Length | 155 mm |
| Measurement Range 2 | 0 - 20.00 mg/L |
| Measurement Range 3 | 0 - 200 % |
| Operating Temperature Range | 0 - 50 °C |
| Options | Sea Water Application |
| Pressure Range | 3.5 bar |
| Range | 0 - 20.00 ppm |
| Repeatability | ± 0.1 ppm (mg/L) |
| Resolution | 0.01 ppm (mg/L)；0.1% saturation |
| Response Time | T90 < 40 s；T95 < 60 s |
| Sensor Cable | 10 m |
| Sensor Immersion Depth | Down to 34 m (112 ft.), 345 kPa (50 psi), maximum;accuracy may not be maintained at this depth; |
| Storage Conditions | -20 °C to 70 °C |
| Transmission Distance | 100 m (328 ft.) maximum; |
| Warranty | 12 months |
| Weight | 1 kg (2.2 lbs), probe only |
| What's included? | Includes: LDO probe |
Product details
FAQS
Company Advantage
• We always put our customers first and treat each customer sincerely. Besides, we strive to meet the requirements of customers, and solve their problems duly.
• With high-quality products and good reputation, our company not only sell products domestically but also exports them to various regions abroad.
• Our company currently has a number of excellent teams with industry-related knowledge and skilled production workers, who can ensure that our products are of good quality.
Look forward to inquiries from customers in various industries
Lane 1505, Lianhang Road, Minhang District, Shanghai